Jotun Marine and Coastal

A two pack, high solids, high gloss topcoat for industrial use in offshore corrosive environments. Cures down to 0°C.

A 2 pack structural steel and piping coating that will continue to cure while immersed.

A two component epoxy mastic coating for repair and maintenance.

A 2 pack polyamine cured zinc rich epoxy coating, benefiting from high solids. Suitable for CX environments, and can be applied down to 0°C.

For exterior and interior marine areas, including outside hulls, superstructures, decks and water ballast tanks as an outfitting primer.

A 2 pack polyamine cured pure epoxy coating that can be used as primer, mid-coat, finish coat or as single coat system in atmospheric and immersed environments. Can be applied down to -10°C.

Provides corrosion protection for surfaces operating at extreme temperatures down to -196°C and high temperatures up to 250°C on carbon steel.

Specially designed as a universal, all round, all year, new building coating where fast dry to handle is required.

Corrosion protection for surfaces operating at elevated temperatures where long corrosion protection is desired. Suitable for insulated and non insulated surfaces. 

A 2 pack acrylic coating, formulated as a topcoat in pre-qualified NORSOK systems and offshore environments.

A low gloss polyurethane topcoat for atmospheric environments.

A two component surface tolerant, high solids, high build coating. NORSOK approved.

A topcoat for use in atmospheric environments, on a wide range of industrial structures. Replaces Pioner Topcoat.

A 1 pack polysiloxane topcoat formulated to give a cosmetic finish with superior colour and gloss retention. NORSOK approved.