Jotun Marine and Coastal

A high end surface tolerant epoxy mastic coating for less severe exposures or when shorter maintenance intervals are expected in tougher environments.

A 1 part alkyd that is fast drying, high build, zinc phosphate pigmented primer / mid coat for atmospheric environments.

A 3 part, high solids, surface tolerant, abrasion resistant anti-corrosive epoxy coating. Blend of fused aluminium oxide.

A 2 pack fast drying coating. Can be applied on steel, aluminium and concrete at sub zero surface temperatures.

For application to steel where blast cleaning may not be possible, excellent corrosion resistance.

An industry approved topcoat for metal and coated surfaces subject to highly atmospheric environments.

A two component epoxy coating for carbon and shop primed steel and coated surfaces. Can be applied at sub zero surface temperatures.

A 2 pack chemically curing high gloss aliphatic acrylic polyurethane coating. Provides resistance to UV and chemicals.

A 2 pack high build anti-corrosive epoxy mastic for high film thicknesses for smaller maintenance and repair jobs.

A hard wearing top coat for use in aggressive atmospheric exposure. Network Rail approved. Highways Approved No.169.

A single component oxidatively drying alkyd coating for engines, topside, deck and superstructure.

A two component fast drying coating. Can be applied on steel, aluminium and concrete at sub zero surface temperatures.

For application to steel where blast cleaning may not be possible, excellent corrosion resistance and available in a choice of colours.

A 2 pack surface tolerant, long lasting corrosion protection for carbon steel and aged coatings found in severe environments.

A 2 pack polysiloxane topcoat with excellent gloss and colour retention. Network Rail / Highways No. 185.

A two component moisture curing inorganic zinc ethyl silicate coating. Heat resistant up to 540°C.

A one component physically drying silicone acrylic coating that is heat resistant up to 600°C.

A two component polyamide cured epoxy coating. To be used as topcoat in atmospheric environments.

A low film build anti-corrosive primer for application to steel. Network Rail approved. Highways Approved No. 109

A 2 pack polyamide cured vinyl epoxy based coating. Formulated as a tie coat between epoxy primers and anti-fouling systems.

Fouling coating that ensures an active surface continuously renewed providing a clean hull for the whole season.

Formally Jotun Penguard Tie Coat. A 2 pack, polyamide cured, high molecular weight epoxy coating.

Low temperature curing, two component coating, providing protection in atmospheric and immersed environments.

A two component moisture curing inorganic zinc ethyl silicate coating. Heat resistant up to 540°C.

A two component polyamide highly pigmented zinc phosphate coating. Highways Approved Item No. 110.

A hard wearing top coat for use in aggressive atmospheric exposure. Network Rail approved. Highways Approved Item No 168

Surface-tolerant epoxy mastic for less severe exposures in tough environments.

A two pack ceramically reinforced polyamide cured zinc rich epoxy coating. High expected durability in corrosivity category C5H and C5VH.