*Hempel Hempatex Primer 19161
Please note, this product is now discontinued. Contact our technical team for a suitable alternative.
Hempel Hempatex Primer 19161 is a paint based on a special resin for temporary corrosion protection of high temperature equipment.
Best Uses
Hempel Hempatex Primer 19161 is best used for temporary corrosion protection during storage and fabrication of high temperature equipment such as pipes, heating coils and hot ventilation channels. When heated, the paint decomposes slowly under moderate release of gases. 19161 can offer temporary protection in highly corrosive environments like C5 according to ISO 12944.
Meets the requirements of DASt - Guideline 006.
Application
Remove oil, grease and other contaminants by suitable detergent cleaning. Remove salts, detergents and other contaminants by high pressure fresh water cleaning.
New build: Abrasive blasting to min. Sa 1 (ISO 8501-1) / SP 7 (SSPC). Clean thoroughly by hand or power tool to St 3 (ISO 8501-1) / SP 3(SSPC). Avoid polishing. Remove dust, blast media and loose materials.
Maintenance and Repair: Spot abrasive blasting to min. Sa 1 (ISO 8501-1) / SP 7 (SSPC). Minor areas can be cleaned by power tool to St 2 provided the surface is roughened and not polished. Water jetting to min. Wa 2 (ISO 8501-4). Flash rust degree of maximum FR M (ISO 8501-4). Remove dust, blast media and loose materials.
Stir well before use. Apply via airless spray or air spray following product data sheet guidance.
Approvals and Certifications
- Meets the requirements of DASt - Guideline 006.
Technical Info
| Components: | One Part |
| Type: | Temporary Sacrificial Coating |
| Finish: | Aluminium Pigmented |
| Stock Colours: | Aluminium Brown 50670 |
| Tintable: | No |
| VOC Content: | 467.0g per Litre |
| Volume Solids: | 49% |
| Suitable Substrates: | As a temporary corrosion protection during storage and fabrication ofhigh temperature equipment such as pipes, heating coils and hotventilation channels. |
| Application Method: | Air or Airless Spray |
| Theoretical Coverage: | 8.2 m2 per litre |
| Wet Film Thickness (WFT): | 120 microns |
| Dry Film Thickness (DFT): | 60 microns |
| Induction Time: | - |
| Pot Life: | - |
| Surface Dry: | 30 minutes at 20°C |
| Overcoatable: | 4 hours at 20°C |
| Fully Cured: | |
| Cleaner / Thinner: | Thinner: Hempel's Thinner 08080, Cleaner: Hempel's Tool Cleaner 99610 |
| Shelf Life: | 36 months |
| Packaging: | Available in 5 and 20 Litres |